Please note that an internet connection is required for the installation and activation of the aquasuite software.

Power everything down again; you can disconnect the USB cable as it is unusable. Connect the Aquabus high port to a Hubby7 or the Aquabus high port on the Aquaero XT. Then you can connect your wiring for the extra fan channels to the Aquaero LT. You can actually add a third Aquaero for up to 12 channels of control if you need more channels.By constantly monitoring motor parameters and coolant temperature, a sophisticated algorithm is used by the controller unit to calculated the current coolant flow rate. The accuracy does not match the accuracy of an external flow sensor, but is entirely sufficient for monitoring purposes. Alternatively, a mechanical flow sensor can be connected to the fan output for a more accurate flow measurement.

Another warning states the slave unit will not be recognized by USB any longer and will only work over the Aquabus connected to the main Aquaero XT. Also keep in mind that the only outputs that will work on the slave unit are the four fan channels, the temp sensor inputs, and you can add a second flow meter to the Aquabus low port. All other outputs are now disabled. When you activate this product you will receive the current version of the aquasuite software including an upgrade service for at least eighteen (18) months. After the expiration of the upgrade service you may use and reinstall the latest version available during the upgrade period without a time limit. Alternatively to the LED strips offered by Aqua Computer, LED fans made by Corsair and NZXT can be connected using the optional accessory RGBpx Splitty4 (item code 53267, not included in delivery). Once the Firmware is updated you can remove the USB cables, and just use the Aquabus cables for control. It's absolutely fine to leave both Aquabus and the USB cables connected if you would like too, that’s what I do. It makes future firmware updates much easier.

airplex modularity system

Once you start the Aquasuite program the Aquaero will show up, and a warning comes up that shows the firmware is out of date, and this device will not function with this version of Aquasuite. It is not always easy to visualize what to do by merely reading instructions. So my goal here is to use many screen shots, and walk you through how I set up my two Aquaeros and the Aquasuite software on this particular build. The high flow NEXT is more than just a flow sensor. In addition to recording the coolant flow, it also measures its temperature and quality. These features in combination with the stylish RGBpx lighting and the built-in control including OLED display make the high flow NEXT interesting for both professional users and water cooling enthusiasts.