Contains: 1 x RapidCool™ Flask, 1 x Digital Lid, 1 x Small Milk Powder Formula Dispenser, 1 x Lid Cleaning Brush

Can operate autonomously with existing controls showing that this is simple and fast to use, controlling the cooling profile and incorporating some key safety features: We recommend that the feed is used immediately (as soon as the Nuby light turns green and indicates the feed has cooled sufficiently), as per the NHS guidelines.Use with tap water: There is no need to use bottled or filtered water; Our antibacterial filter, with internal filtration membrane, removes bacteria, impurities and contaminants Also to demonstrate that the technology is scalable without incurring problems e.g. multiple cooling chambers would increase cost and bulk of equipment and multiple vortices may cause interference between cans. Different mechanics Capable of cooling four cans simultaneously with no more than 33% increase in cooling time per can, guaranteeing shorter waiting times under high demand. Within the project the system was presented to a World Leading, global distributor of beer, and achieved a positive evaluation and an offer to support future development and testing. . This was based not only on the performance results obtained but on observation of the anticipated operation of the commercial system from a user perspective. A detailed specification was provided for a system, and even using the project proof of principal prototypes over 70% of the requirements could be met. Importantly, scope limitations, technical and safety restrictions prevented some other tests from being conducted using this stage prototype, otherwise it is thought this could be even higher. No, you don’t have to wait! The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that the water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated! To make the night feed, mix the formula with some hot water, give it a shake and then add the cold water. This safely kills bacteria in the formula while bringing the milk to drinking temperature straight away. It does the same thing as the Perfect Prep machine but this way you know you're using hot enough water (which is the issue with the Prep machine).

Commercial refrigerators and freezers are ubiquitous and are used in diverse environments such as supermarkets, grocery stores, service stations, restaurants, hotels, pubs, and cafés. The most visible types are vending machines and open or closed refrigerated cabinets. Combined commercial refrigerator/freezers are estimated to consume 85TWh of electricity per annum. This is over 6% of total final energy consumption in the services sector. Can I mix formula with the boiled water immediately or do I have to wait for the water to cool down to 70°C? Multi-Can - Simultaneously cooling of small batches to achieve even faster vend times, and satisfy higher demand: Energy savings of over 80% compared with typical refrigeration systems could lead to significant savings if widely adopted. These will not only benefit the wider community, but offer distinct advantages to users who face increasing targets for energy reduction. In addition the energy reduction can provide cost savings for retailers and consumers alike. This was one of the primary justifications for the project, and based on both the technical progress and the dissemination work within the project, some major industrial partners/ customers have been already been attracted based on this appeal. Moving forward under the “V-Tex” trademark, the technology has already obtained considerable interest from some world leading, multinational cooperation’s. The Rapidcool project has already demonstrated that “V-Tex”:She does use the prep but has the rapidcool out and about because her little one is on a formula with no premade! DAY AND NIGHT - For a fast, quiet night feed keep the RapidCool to hand, along with the filled milk powder dispenser and the insulated flask of freshly boiled water. When your baby wakes in the night, you’re ready to feed in just 2 minutes without a trip to the kitchen. Validate of energy usage of prototype. To achieve an overall energy saving equivalent to >60-80% of vending machine energy consumption (for refrigeration)