Now, mentally cut a hold in that plinth, and add an appropriately box-shaped heater, and that’s a plinth heater! Of course, such a device needs to be purpose-built for that particular position within the home, so not just any square-ish radiator will do. Best hydronic plinth heater This is a very good produce that works very well if you get it fitted professionally give you the heat when required. Although there’s no remote control included, the on/off controls are large enough to be operated with your foot, to avoid bending down. There are also some disadvantages: as mentioned, they can cost more to run than hydronic plinth heaters, and also the heating element can cause the front grill to get hot.

It fires up whenever the central heating unit switches on or off. The heater comes with an in-built thermostat that prevents the fan from blowing cold air. In the meanwhile, when the central heating system’s water temperature reaches above 38 degrees Celsius, the thermostat automatically switches off. Features It features two heat settings as well as a cool fan. The heat settings work well to take the edge off a cold kitchen – something that’s particularly welcome first thing in the morning! The fan-only setting pushes out cold air which is useful in the warmer months.It has two heat settings, one of which is a ‘boost’ mode that can be used to push more warm air into the room, providing extra warmth on very cold days. The manual override switch means if your house is warm enough with only the general heating on, the fan can be turned off altogether. This is one of the budget heaters that help to save a lot on energy bills. One factor that contributes to its energy efficiency is its direct relation with the central heating system. If it runs at least 5 hours a day, it can save approximately 10 pence every week. The Smiths Hydronic Plinth Heater is more affordable than conventional underfloor heating systems. They not only make extra room for more workspace and additional kitchen storage but also help you save plenty on energy bills. It is an energy-efficient heater suitable in a wide range of outputs for heating various kitchens of different sizes.

Hook up the electric for the fan system– after cutting the fuse box, of course. Install the leads from your plinth heater into the fuse spur of your electric mains. You’ll need to swap out the fuse to match the draw of your heater, which is generally 3 amps. Here’s a detailed guide on plinth heaters, how they work, and what’s required to find a good fit. Key Takeaways To move forward with the installation, make sure to connect the heater flow and pipes. This is important with a hydronic/dual system. Also, take the opportunity to set up the isolation valve for your unit.

Forgot Password

This plinth heater uses hydronic power to keep your kitchen cosy while barely using any electricity. It’s fitted with a heat exchanger which senses when your central heating switches on and draws heat from your boiler. It distributes this warmth around your room using a low-power electric fan, so it uses much less energy than a traditional radiator. Space-Saving