There's a built-in LED light to illuminate your work area, and the screwdriver has two magnetic spots for holding extra bits, so if you are working with different sizes of bit, you can keep them close at hand. The direction reverse buttons are on each side, making it easy for left-handed or right-handed use. The tool comes with a set of nine bits in common Philips, slotted, Torx, and square sizes, but you could use other 1/4-inch-shank bits if desired. On the downside, there is no included carrying case. After hours of research and days of testing 10 of the most popular electric screwdrivers on the market, we discovered that the Ryobi HP44L The 220USB-1U cordless rechargeable Ball Grip screwdriver provides high torque needed for jobs in narrow spaces, assembly work, electrical work, MRO and more.

Charging Time: Approx. 60 min. Number of charges: Approx. 500 times. Charging Method: MicroUSB-typeBThe screwdriver has a 4-volt battery that charges with the included USB cable. You cannot adjust the speed, which tops out at 180 rpm. The torque maxes out at 45 inch-pounds. There's a built-in work light, which is handy when working in cabinets or other dimly lit spots. The Hexdriver does not include a carrying case, however. An ever-popular screwdriver with excellent workability, reliability and stability. For use in precision assembly. The Milwaukee M12 provides the amount of torque you’d expect from a larger tool, like a drill or impact driver, in a comparatively compact size. It’s on the large end of the electric screwdriver spectrum, both in terms of size and the amount of torque it provides, making it possible for it to complete tasks outside of the range of the tests in this guide. For example, all the other screwdrivers tested were maxed out when using one-inch screws. The M12 was able to push past that limit, driving 1.5-inch screws into a wall stud.

This 4-volt cordless screwdriver from Worx is comfortable to hold and maneuver with an inline-grip that reaches into even tight spaces. This electric screwdriver stands out from its counterparts as it boasts three different torque settings. For reversing screws or driving small fasteners, it is recommended to use the lowest setting of 22-inch-pounds. The middle setting is ideal for driving average-sized screws, whereas the high setting of 44-inch-pounds is suitable for driving larger fasteners. The top speed of the drill is 300 rpm; the more tightly you squeeze the trigger, the faster it goes.Performance, quality and durability that are in line with a conventional brushless (BL type), with improved maintainability. https://addictedtotools.com/collections/tools/products/vessel-usb-charge-ball-grip-electric-driver-3-speed-torque-model-220usb-p1 Compatible Screws: Up to M6 (+3 does not support M8), Torque Range: (Electric) – 2 Nm (Manual) – 10 Nm