This way, too much fuel won’t escape the chamber once filled, as an airtight seal is necessary for this purpose. Step 3: Instead, its presence will remain suspended near or at ceiling level until something causes agitation of the room’s lower levels—like from airflow resulting from opening a door. Last Word The entire body of the lighter has been designed to fit nicely in your hand, so is comfortable to use repeatedly if needed. Insert your pin into the small hole at the base of the Bic lighter. This is necessary if you want to properly refill it with butane gas, as a ball seals off this opening and prevents any lighter fluid from coming out or going in.

Butane would spill everywhere if you simply pressed the butane canister valve into the hole you created. As a result, you’ll need to add something to the valve to provide a proper seal. This method is more straightforward but can get messy. The video above will show this process. Step 1:Yes, it is a good idea to shake the canister of butane before filling a lighter. This will mix up any sediment that has settled at the bottom of the container and ensure that you get a consistent fuel flow into your lighter. Once you have gathered all these essential items, you’re ready to refill your BIC lighter. Why You Should Do This Butane can be quite pressurized, so as soon as any gas flow gets cut off, it’ll want all of its fluid out like a tempted faucet that just got shut! To prevent this, place your thumb on the Bic lighter’s hole when removing the butane canister so that nothing gets released. Step 6: You should also ensure your butane container had enough pressure before refilling your lighter and confirm that there was no faulty connection when you filled it with fuel. Does butane float or sink in air?

In a pinch, a large rubber band would suffice. Cut a tiny hole in the rubber band with your pin and insert the valve into it. Or, if you have a good-fitting rubber grommet, that can work too. Step 4: Butane is both lighter and less dense than air, meaning that it will float in the atmosphere. This can make detecting a butane leak more difficult because it won’t sink to the floor like other fuel vapors.

Measures & Pouring

This step should be done carefully with caution as any mishandling could cause significant damage or, worse, loss of life if there is ever an explosion when in use. A sliding tab near the arm of the lighter allows you to easily alter the size of the flame so you can tailor it for specific tasks. When you reload, there are no irritating push pins, no pressing your thumb over the hole, and no liquid fuel spurting anywhere.

After gaining access to this hole, you will need to widen it so your refill valve can fit correctly inside. When deciding what size drill bit is needed, ensure that whatever diameter tool used should not exceed more than slightly wider than the width measurement taken from previous steps when noting down measurements before drilling begins.And of course, a word of warning, you are playing with fire here, so please refill the butane lighter at your own risk. 1. The Pin What You Need

These lighters are refillable, preventing you from needing to buy more, saving you money in the long run. The body of the lighter boasts a fuel level window so you can easily tell when it is time to refill them, and at the bottom is a concealed hook for either attaching this to your waistband for easy access, or for hanging up to store in a safe area when no longer in use. When poking into this opening, be careful not to make puncture any further than needed as doing so could cause an unwanted fuel leak once filled and could also put the lighter into a state of disrepair. Step 2:Simple to use, these Bic Mega Lighters are essential for any busy food service professional. They’re perfect to have on hand for any table top candles, food warmers, and for firing up your BBQ. If none of these tools are available near you, then an appropriately sized flathead pushpin should work fine, too. Knowing how to refill a disposable lighter, on the other hand, is a useful survival ability and just good to know. Place a refill valve at the bottom of the lighter using this process. This encourages you to reload the Bic lighter several times. If you use lighters excessively and need to replace them, you should consider purchasing a refillable lighter.